What types of court repairs do we handle?
We handle the four most common court repair issues across the Austin metro area. Every repair uses professional-grade acrylic materials designed for outdoor sport surfaces — not hardware-store crack filler or house paint.
Crack Repair
The most common court repair. Cracks caused by bad concrete, settling, tree roots, or thermal expansion are filled and sealed to restore a smooth playing surface.
Delamination Repair
Surface coating peeling away from the concrete underneath. We remove the failed coating, prep the concrete, and reapply a proper acrylic system.
Low-Spot Leveling
Birdbaths and ponding areas where water collects after rain. Acrylic filler builds up depressions to restore proper drainage across the court.
Surface Patching
Localized damage repair for areas where the surface has chipped, worn through, or been physically damaged. Targeted fixes without touching the rest of the court.
Standalone Repairs Available
You don’t always need a full resurface. If the damage is isolated — a few cracks, a small delaminated area, one low spot — we can repair just those areas without touching the rest of the court. We also do repair + resurface together when the scope calls for it.
What causes court cracks in Austin?
Cracks are the number one court repair issue in Central Texas. Understanding the root cause helps determine the right fix — and whether the cracks will come back.
Bad Concrete
Insufficient thickness, wrong PSI rating, or improper curing during original construction. The most common root cause of early cracking.
Ground Settling
Central Texas clay soil expands and contracts with moisture changes. This movement shifts the concrete slab and opens cracks over time.
Tree Root Pressure
Common in older Austin neighborhoods. Roots growing under the slab lift and crack the concrete from below.
Thermal Expansion
Extreme Texas heat cycles cause rigid concrete to expand and contract repeatedly, eventually cracking at stress points.
Age
All court surfaces degrade eventually. A typical acrylic surface lasts 8–10 years before repairs or resurfacing become necessary.
Austin-Specific Note
Central Texas clay soil is one of the most expansive soil types in the country. Courts built on untreated clay are significantly more likely to develop cracks from ground movement. If you’re in Austin, Round Rock, Cedar Park, or Georgetown, soil conditions are a major factor in court longevity.
What is court delamination?
Delamination is when the surface coating separates from the concrete underneath. It looks like bubbling, peeling, or flaking — and it gets worse over time as water works its way under the loose coating.
Common causes:
- Moisture trapped under the surface — Water vapor migrating up through the concrete pushes the coating off
- Coating applied over uncured concrete — New concrete needs proper cure time before coating; rushing causes adhesion failure
- Poor surface prep — Coating applied over dirty, dusty, or unsealed concrete won’t bond
- Low-quality paint — House paint or cheap coatings aren’t formulated for sport court adhesion and UV exposure
The fix: Remove all failed coating down to bare concrete, pressure wash and prep the surface, then reapply a proper multi-coat acrylic system designed for outdoor sport courts.
Why Delamination Happens
Delamination is usually a sign the original surfacing was done wrong. A proper acrylic system like ATS Acrytech bonds correctly to prepared concrete and won’t delaminate. If your court is peeling, the root cause is almost always in the original prep or materials — not normal wear.
When should I repair vs resurface?
Not every court needs a full resurface. Here’s how to know which scope makes sense for your situation.
Repair Only
- Isolated cracks in an otherwise sound surface
- Small delaminated areas — less than 20% of total surface
- Minor low spots causing localized ponding
- Surface is less than 8 years old and in generally good condition
Full Resurface
- Widespread cracking across multiple areas
- Significant fading, chalking, or color loss
- Multiple problem areas — cracks, peeling, and ponding together
- Surface is 8+ years old and showing overall wear
Rule of Thumb
If more than 20–30% of the surface has issues, a full resurface is more cost-effective than patching everywhere. Patching a heavily damaged court creates an uneven patchwork that doesn’t play well and won’t last. See our full resurfacing guide for process, pricing, and what to expect.
Court repair FAQs
Common questions about court crack repair, delamination fixes, and surface restoration in Austin and Central Texas.
Can you repair court cracks without resurfacing?
Yes. We do standalone crack repair for isolated damage. If the rest of the surface is in good condition, there’s no need for a full resurface — we fill and seal the cracks and you’re back to playing.
What causes tennis court delamination?
Delamination is caused by moisture trapped under the surface, applying coatings over uncured concrete, poor surface prep before coating, or using low-quality paint instead of a proper acrylic system.
How long does court repair take?
Standalone repairs typically take 1–3 days depending on the scope. If combined with a full resurface, the total project runs 3–5 days.
Do you repair pickleball courts?
Yes. The repair process is the same for pickleball courts — crack filling, delamination removal, low-spot leveling, and surface patching. We work on dedicated pickleball courts and shared tennis/pickleball courts.
Do you repair basketball courts?
Yes. We repair all sport court types including basketball courts. Crack repair, delamination fixes, and leveling apply to any acrylic sport surface.
Can you fix ponding or birdbaths on my court?
Yes. Low-spot leveling uses acrylic filler to build up depressions where water collects. This restores proper drainage and eliminates standing water after rain.
Do you serve Austin?
Yes. We serve the full Austin metro area including Round Rock, Cedar Park, Georgetown, and surrounding Central Texas communities.
Related reading
Need a Court Repair Assessment?
Send us photos of the damage and we'll tell you whether you need a repair, a resurface, or both. Free assessment, 48-hour response.
Request a Bid